Promethean ActivPanel Guide de l'utilisateur Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
Inspect the ActivPanel Touch for any physical damage to the
casing before use. If damage is apparent, take care to avoid
contact with any potentially live parts.
Do not under any circumstances try to gain access to
internal parts of the ActivPanel Touch. If you suspect
that the device is damaged or faulty, you should contact
Technical Support, or an authorised Promethean service
agent for advice.
Always use accessories recommended by Promethean to
ensure compatibility.
Only use the power cable that is compatible with your mains
outlet socket. If you are unsure of the electrical compatibility
of your equipment, please contact Promethean or an
authorised Promethean service agent before attempting to
connect the device to the mains supply.
Use a wall socket that is close to the ActivPanel Touch and
that is easily accessible.
Firmly insert the power plug into the wall socket. Partial
connection could cause sparks or fire.
To avoid the risk of electric shock or component damage,
disconnect the ActivPanel Touch from the power supply
before plugging in any other cables.
To avoid the risk of electric shock, do not touch the power
plug with wet hands.
Hold the power plug when unplugging the device. Pulling
the power cable may damage the wires inside the cable and
cause fire or electric shock.
Unplug the power plug before cleaning the ActivPanel
Touch.
Do not use any liquid or a spray cleaner when wiping the
device. Use a slightly damp cloth. Never use any alcohol-,
solvent-, or ammonia-based liquid when wiping the screen.
Do not use abrasive cleaners.
When moving the ActivPanel Touch from an area of low
temperature to one of high temperature, condensation
may form on the housing. Do not power on the device
immediately after this to avoid causing fire, electric shock or
component damage.
To avoid electric shock, avoid handling the power cable
during electrical or thunder storms.
Unplug the ActivPanel Touch during a lightning storm or
when it will not be used for a long period of time. This will
protect the device from damage due to power surges.
Do not place the ActivPanel Touch in front of an air
conditioning unit to avoid condensation which could cause
fire, electric shock or component damage.
The ventilation holes in the housing are designed to protect
the ActivPanel Touch against overheating. Be careful not to
block them.
Do not embed the ActivPanel Touch in a cabinet, unless the
cabinet is well ventilated.
Do not put the ActivPanel Touch on or beside any radiator
or heater.
Never insert any sharp or metal objects into the ventilation
holes or signal joints of the ActivPanel Touch.
Never place, spill or pour any liquid on any part of the
ActivPanel Touch. The device could short circuit causing a
fire or electric shock.
Do not use your fingers or any other hard object to knock,
press on or scratch the screen of the ActivPanel Touch.
Do not put any flammable or explosive objects near the
ActivPanel Touch.
The remote control operates on 2 x AAA alkaline batteries.
Risk of explosion if batteries are replaced with incorrect
type!
Incorrect polarity may cause damage or leakage of the
batteries, operating injury and contamination of the remote
control.
Keep new and used batteries away from children and pets.
If the battery compartment does not close securely, stop
using the remote control and keep it away from children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate medical
attention.
Safety Information
ActivPanel Touch User Guide 5
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 19 20

Commentaires sur ces manuels

Pas de commentaire